There are so many details and finishing touches that go into the construction of a new home. From selecting the perfect paint colors to selecting the right flooring materials, there is no shortage of considerations when it comes to this type of construction.
One detail you’ll likely want to focus on early in the construction process is skirting boards. Whether your home has traditional architecture or a more modern design, these boards can add an excellent accent piece while hiding imperfections in a home’s foundation, wall frames, and another visible framing.
What Is A Skirting Board?
A skirting boards is a type of molding that is installed along the floor on the wall’s edge. It typically has a 45-degree angle from the ground and covers up any gaps or unevenness in the home’s foundation, wall frames, and another visible framing. Skirting boards are an excellent way to keep floors looking neat, as well as protect your walls from dirt and damage.
When To Use Vinyl Skirting Boards
Vinyl skirting boards are often the best choice for homes with a more traditional design. These can be installed on walls, around doors and doorways, and in other areas to create a clean line that visually separates the flooring below from the wall above.
Vinyl is also great for homes with a more modern design as it’s often offered in bolder colors and patterns that can add an interesting focal point to your home’s aesthetic. However, if you live in an area prone to heavy rain or snow, you may want to consider a material that can better withstand moisture like vinyl or hardwood.
When To Use Wood Skirting Boards
If you’re going for a traditional look, wood is the best type of skirting board to use. Wood is durable and can be stained or painted in a variety of hues. It’s also flexible enough to accommodate the inevitable bumps and dents that come from daily wear-and-tear.
If you are looking for an alternative material, metal will work well with a more contemporary design. Metal is extremely durable and doesn’t require painting or staining.
Tips For Installing Vinyl Skirting Boards
When you’re ready to install your new vinyl skirting boards, it pays to do your research. Make sure you know what type of board you’ll be installing and then select the right adhesive that’s compatible with the material.
Skirting boards are installed in a variety of ways, so be sure to measure the height and width of each board before installing them to make sure they fit properly. Traditional skirting boards are usually installed about 1 inch from the ground and sit parallel with an exterior wall.
If possible, try to install these boards first so that if there are any dimensional errors, they can be corrected early on. This will save time and reduce the risk of having to remove and reinstall more than one board if there is a mistake.
Tips For Installing Wood Skirting Boards
There are a few important things to know about installing wood skirting boards. First, if you’re using pre-fabricated boards, make sure the rails or legs of the board are screwed into a stud. You also want to make sure the boards are flush with each other and level with the floor. Lastly, be sure to drill pilot holes before screwing any screws into your skirting boards.